Choose the Banner that's Right for Your Church's Needs

Outreach has the largest selection of banner sizes and materials - there is one to fit any space in your building! Start with the location and learn more about the options available:

Choose from seven indoor banner sizes and a variety of materials - no matter what you select you can be sure that we only use the highest quality materials that are sure to last.

Attract attention with an outdoor banner or sign. Choose from these options:

15 oz Non-Curl Vinyl

Superior non-curl vinyl is the highest quality on the market and has the least possible curling edge
Best possible banner graphic clarity. The super smooth surface allows for high resolution banner printing
Flexible enough to be used indoor or in low-stress outdoor environments

Recommended banner sizes and finishes:

2' x 6' vertical: the most versatile size with a variety of finishing options including grommets in each of 4 corners for mounting to the Xstand or pole pockets at top and bottom for use with the Indoor 2-sided Banner stand .
Roll-Up Banner available in two sizes: 2'7”x 6'7” or 4' x 6'7” installed in a retractable rollup stand.
3' x 5' vertical: comes with pole pockets at the top and bottom. Easy to hang using the Indoor 2-sided Banner stand, a Banner Rod Kit, or the hanging banner dowel set.
3' x 3' square: finish with grommets in each of 4 corners or with pole pockets - makes a great sign for directing traffic around your building.
Custom banner sizes also available. Limiting dimension is 10' by 164' or any size in between. Example: 24' long by 10' tall (24' x 10'), 10' is the limiting dimension

5.3 oz. Polyester Poplin Fabric

Brilliant white fabric
Soft hand printing surface gives a luxurious look and feel
Fabric hangs well and is virtually wrinkle-free
For use with dye-sublimation printing for bright, vivid colors

Recommended banner sizes and finishes:

2' x 6' and 3' x 5' vertical: come with pole pockets at the top and the bottom. Fits on optional Indoor 2-sided Banner stand.
5' x 8' Wall Banner with pole pockets at the top and the bottom. Optional Banner Rod Kit available.
Jumbo 9'8” x 7'2” Fabric banners can be hung behind your stage or in a classroom with optional Banner Rod Kit.
Custom banner sizes available. Limiting dimension is 5' by 122' feet or any size in between. Example: 24' long by 8' tall (24' x 8'), 8' is the limiting dimension

Double-knit Polyester Stretch Fabric

Wrinkle-free, stretch material is printed using a dye-sublimation technique so colors are rich and bright.
Banners can be printed on both sides with the same image.

Recommended banner sizes and finishes:

Choice of three sizes: 2' x 6', 2'7" x 6'7" and Jumbo 9'8” x 7'2”.
Sleeve banners are sewn like a pillow case to slide over the Click-it Frames (sold separately) and cling tightly for a wrinkle-free, eye-catching results.

Backlit Fabric

Available in 2' x 6' size only.
Designed for use with LED Backlit free-standing Banner Stand only
For use with dye-sublimation printing for bright, vivid colors that don't wash out when lit from behind.

StickUp Adhesive Church Banner Material

Removable banner material sticks on any smooth surface. No stand required
Poly substrate is smooth, providing great color and detail
Does not shrink, stretch or tear
Caution: Adhesive failure can happen when temperatures are too hot or too cold. Smooth surfaces are required, textured/bumpy surfaces limit adhesion (i.e., no texture walls or cinder block). The larger the banner the more important the conditions become. Don't let it stick to itself - grab a friend to help put it up!

Recommended banner sizes and finishes:

3' x 3' Square
Available in 2' x 6', 3' x 5'and 3' x 8'
Custom banner sizes available. Limiting dimension is 3' by 100' feet or any size in between. Example: 24' long by 3' tall (24' x 3'), 3' is the limiting dimension

Perforated Window Cling Church Banner Material

Window Banners provide see-through graphics on perforated adhesive film allowing eye-catching graphics on one side and an unobstructed view from the other. Virtually all glass surfaces now have the potential for welcoming visitors, promoting ministry involvement, and inspiring church members with God's word.

Adhesive perforated window cling material sticks to glass - no stand required
Reduces heat and glare from the sun
Easy to remove just loosen a corner and pull.
Not rated for automobiles

Recommended banner sizes and finishes:

3' x 3' Square
Custom banner sizes available.Note there is a 4 square foot minimum and the maximum size in the shortest direction is 53 inches. Please take the horizontal and vertical orientation of your display area into consideration when designing your banner

13 oz. Reinforced Vinyl Material

High quality banner material for outside durability and graphic clarity
Printed with vivid, waterproof, fade resistant inks
Smooth printing surface with best color and visibility of designs and letters
Strong outdoor 13 oz. durable vinyl with nylon cord embedded every eighth of an inch preventing tears and rips. (Even if the banner is ripped or sliced, the cord will prevent the banner from continuing to rip or tear)
Flexible use, well built and durable for outdoor environments, quality printing surface for indoor viewing and use

Recommended banner sizes and finishes:

3' x 8', 4' x 8' and larger horizontal sizes: includes grommets in each corner and every two feet. Fits on an optional A-Frame Banner Stand or Outdoor Banner Display System
Lightpole Banners - These 2' x 5 banners are designed to be used on parking lot light poles using specially designed Lightpole Hardware Kits.
Custom banner sizes also available. Limiting dimension is 10' by 164' or any size in between. Example: 24' long by 10' tall (24' x 10'), 10' is the limiting dimension

Flag Banner 130 g Polyester

The 130 g knitted polyester meets or exceeds the industry standard for outdoor flags
Light-weight material is designed to provide maximum movement in the slightest breeze.
Custom flag banners will be printed using the Dye Sublimation process
Flag banners are printed on one side with about a 90% bleed through of the inks creating a reverse image on the back
Sturdy construction to withstand bad weather but like all outdoor signage, flag banners are affected by long-term exposure to wind and the elements
To greatly extend the longevity of both the fabric and the print, it is recommended that, when possible, these flags are taken down and stored inside at night or when not in use.
Optional, super-strong carbon fiber hardware sold separately.